2 - VMS (or OpenVMS)
                 3 - Unix
                 4 - VM/CMS
                 5 - Atari TOS
                 6 - HPFS filesystem (OS/2, NT)
                 7 - Macintosh
                 8 - Z-System
                 9 - CP/M
                10 - TOPS-20
                11 - NTFS filesystem (NT)
                12 - QDOS
                13 - Acorn RISCOS
               255 - unknown

         XLEN (eXtra LENgth)
            If FLG.FEXTRA is set, this gives the length of the optional
            extra field.  See below for details.

         CRC32 (CRC-32)
            This contains a Cyclic Redundancy Check value of the
            uncompressed data computed according to CRC-32 algorithm
            used in the ISO 3309 standard and in section 8.1.1.6.2 of
            ITU-T recommendation V.42.  (See http://www.iso.ch for
            ordering ISO documents. See gopher://info.itu.ch for an
            online version of ITU-T V.42.)

         ISIZE (Input SIZE)
            This contains the size of the original (uncompressed) input
            data modulo 2^32.

      2.3.1.1. Extra field

         If the FLG.FEXTRA bit is set, an "extra field" is present in
         the header, with total length XLEN bytes.  It consists of a
         series of subfields, each of the form:

            +---+---+---+---+==================================+
            |SI1|SI2|  LEN  |... LEN bytes of subfield data ...|
            +---+---+---+---+==================================+

         SI1 and SI2 provide a subfield ID, typically two ASCII letters
         with some mnemonic value.  Jean-Loup Gailly
         <gzip@prep.ai.mit.edu> is maintaining a registry of subfield
         IDs; please send him any subfield ID you wish to use.  Subfield
         IDs with SI2 = 0 are reserved for future use.  The following
         IDs are currently defined:




 
RFC 1952             GZIP File Format Specification             May 1996


            SI1         SI2         Data
            ----------  ----------  ----
            0x41 ('A')  0x70 ('P')  Apollo file type information

         LEN gives the length of the subfield data, excluding the 4
         initial bytes.

      2.3.1.2. Compliance

         A compliant compressor must produce files with correct ID1,
         ID2, CM, CRC32, and ISIZE, but may set all the other fields in
         the fixed-length part of the header to default values (255 for
         OS, 0 for all others).  The compressor must set all reserved
         bits to zero.

         A compliant decompressor must check ID1, ID2, and CM, and
         provide an error indication if any of these have incorrect
         values.  It must examine FEXTRA/XLEN, FNAME, FCOMMENT and FHCRC
         at least so it can skip over the optional fields if they are
         present.  It need not examine any other part of the header or
         trailer; in particular, a decompressor may ignore FTEXT and OS
         and always produce binary output, and still be compliant.  A
         compliant decompressor must give an error indication if any
         reserved bit is non-zero, since such a bit could indicate the
         presence of a new field that would cause subsequent data to be
         interpreted incorrectly.

3. References

   [1] "Information Processing - 8-bit single-byte coded graphic
       character sets - Part 1: Latin alphabet No.1" (ISO 8859-1:1987).
       The ISO 8859-1 (Latin-1) character set is a superset of 7-bit
       ASCII. Files defining this character set are available as
       iso_8859-1.* in ftp://ftp.uu.net/graphics/png/documents/

   [2] ISO 3309

   [3] ITU-T recommendation V.42

   [4] Deutsch, L.P.,"DEFLATE Compressed Data Format Specification",
       available in ftp://ftp.uu.net/pub/archiving/zip/doc/

   [5] Gailly, J.-L., GZIP documentation, available as gzip-*.tar in
       ftp://prep.ai.mit.edu/pub/gnu/

   [6] Sarwate, D.V., "Computation of Cyclic Redundancy Checks via Table