"The brew type of the coffee pot."
::= { coffee 3 }
potLocation OBJECT-TYPE {
SYNTAX DisplayString (SIZE (0..255))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The physical location of the pot in question"
::= { coffee 4 }
potMonitor OBJECT IDENTIFIER ::= { coffee 6 }
potOperStatus
SYNTAX Integer {
off(1),
brewing(2),
holding(3),
other(4),
waiting(5)
RFC 2325 CP MIB 1 April 1998
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The operating status of the pot in question. Note
that this is a read-only feature. Current hardware
prevents us from changing the port state via SNMP."
::= { potMonitor 1 }
potLevel OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of units of coffee under management. The
units of level are defined in potMetric below."
::= { potMonitor 2 }
potMetric OBJECT-TYPE
SYNTAX Integer {
espresso(1),
demi-tasse(2),
cup(3),
mug(4),
bucket(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The vendor description of the pot under management"
::= { potMonitor 3 }
potStartTime OBJECT-TYPE
SYNTAX Integer64
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The time in seconds since Jan 1 1970 to start the pot
if and only if potOperStatus is waiting(5)"
::= { potMonitor 4 }
lastStartTime OBJECT-TYPE
SYNTAX TimeInterval
MAX-ACCESS read-only
STATUS current
DESCRIPTION
RFC 2325 CP MIB 1 April 1998
"The amount of time, in TimeTicks, since the coffee
making process was initiated."
::= { potMonitor 5 }
potTemperature OBJECT-TYPE
SYNTAX Integer32
UNITS "degrees Centigrade"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The ambient temperature of the coffee within the pot"
::= { potMonitor 6 }
=3= |