Identifier     An identifier to aid in matching Echo Replies
                  to this Echo Request.  May be zero.

   Sequence Number

                  A sequence number to aid in matching Echo Replies
                  to this Echo Request.  May be zero.

   Data           Zero or more octets of arbitrary data.









 
RFC 2463                 ICMPv6 (ICMP for IPv6)            December 1998


   Description

   Every node MUST implement an ICMPv6 Echo responder function that
   receives Echo Requests and sends corresponding Echo Replies.  A node
   SHOULD also implement an application-layer interface for sending Echo
   Requests and receiving Echo Replies, for diagnostic purposes.

   Upper layer notification

   Echo Request messages MAY be passed to processes receiving ICMP
   messages.

4.2 Echo Reply Message

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Type      |     Code      |          Checksum             |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |           Identifier          |        Sequence Number        |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |     Data ...
      +-+-+-+-+-

   IPv6 Fields:

   Destination Address

                  Copied from the Source Address field of the invoking
                  Echo Request packet.

   ICMPv6 Fields:

   Type           129

   Code           0

   Identifier     The identifier from the invoking Echo Request message.

   Sequence       The sequence number from the invoking Echo Request
   Number         message.

   Data           The data from the invoking Echo Request message.









 
RFC 2463                 ICMPv6 (ICMP for IPv6)            December 1998


   Description

   Every node MUST implement an ICMPv6 Echo responder function that
   receives Echo Requests and sends corresponding Echo Replies.  A node
   SHOULD also implement an application-layer interface for sending Echo
   Requests and receiving Echo Replies, for diagnostic purposes.

   The source address of an Echo Reply sent in response to a unicast
   Echo Request message MUST be the same as the destination address of
   that Echo Request message.

   An Echo Reply SHOULD be sent in response to an Echo Request message
   sent to an IPv6 multicast address.  The source address of the reply
   MUST be a unicast address belonging to the interface on which the
   multicast Echo Request message was received.

   The data received in the ICMPv6 Echo Request message MUST be returned
   entirely and unmodified in the ICMPv6 Echo Reply message.

   Upper layer notification

   Echo Reply messages MUST be passed to the process that originated an