<!ELEMENT link (src+, dst+) >
   <!ELEMENT dst (#PCDATA) >
   <!ELEMENT src (#PCDATA) >

   <!ELEMENT multistatus (response+, responsedescription?) >

   <!ELEMENT response (href, ((href*, status)|(propstat+)),
   responsedescription?) >
   <!ELEMENT status (#PCDATA) >
   <!ELEMENT propstat (prop, status, responsedescription?) >
   <!ELEMENT responsedescription (#PCDATA) >





 
RFC 2518                         WEBDAV                    February 1999


   <!ELEMENT prop ANY >

   <!ELEMENT propertybehavior (omit | keepalive) >
   <!ELEMENT omit EMPTY >

   <!ELEMENT keepalive (#PCDATA | href+) >

   <!ELEMENT propertyupdate (remove | set)+ >
   <!ELEMENT remove (prop) >
   <!ELEMENT set (prop) >

   <!ELEMENT propfind (allprop | propname | prop) >
   <!ELEMENT allprop EMPTY >
   <!ELEMENT propname EMPTY >

   <!ELEMENT collection EMPTY >

   <!--=========== Property Elements from Section 13 ===============-->
   <!ELEMENT creationdate (#PCDATA) >
   <!ELEMENT displayname (#PCDATA) >
   <!ELEMENT getcontentlanguage (#PCDATA) >
   <!ELEMENT getcontentlength (#PCDATA) >
   <!ELEMENT getcontenttype (#PCDATA) >
   <!ELEMENT getetag (#PCDATA) >
   <!ELEMENT getlastmodified (#PCDATA) >
   <!ELEMENT lockdiscovery (activelock)* >
   <!ELEMENT resourcetype ANY >
   <!ELEMENT source (link)* >
   <!ELEMENT supportedlock (lockentry)* >
   ]>





















 
RFC 2518                         WEBDAV                    February 1999


23.2 Appendix 2 - ISO 8601 Date and Time Profile

   The creationdate property specifies the use of the ISO 8601 date
   format [ISO-8601].  This section defines a profile of the ISO 8601
   date format for use with this specification.  This profile is quoted
   from an Internet-Draft by Chris Newman, and is mentioned here to
   properly attribute his work.

   date-time       = full-date "T" full-time

   full-date       = date-fullyear "-" date-month "-" date-mday
   full-time       = partial-time time-offset

   date-fullyear   = 4DIGIT
   date-month      = 2DIGIT  ; 01-12
   date-mday       = 2DIGIT  ; 01-28, 01-29, 01-30, 01-31 based on
   month/year
   time-hour       = 2DIGIT  ; 00-23
   time-minute     = 2DIGIT  ; 00-59
   time-second     = 2DIGIT  ; 00-59, 00-60 based on leap second rules
   time-secfrac    = "." 1*DIGIT
   time-numoffset  = ("+" / "-") time-hour ":" time-minute
   time-offset     = "Z" / time-numoffset

   partial-time    = time-hour ":" time-minute ":" time-second