Network Working Group                                        Bill Duvall
Request for Comments: 2                                              SRI


                            [unknown title]


[page 1 missing]

1 LINKS

   1a Control Links

      1a1 Logical link 0 will be a control link between any two HOSTs on
      the network

         1a1a Only one control link may exist between any two HOSTs on
         the network. Thus, if there are n HOSTs on the network, there
         are n-1 control links from each HOST.

      1a2 It will be primarily used for communication between HOSTs for
      the purposes of:

         1a2a Establishing user links

         1a2b Breaking user links

         1a2c Passing interrupts regarding the status of links and/or
         programs using the links

         1a2d Monitor communication

      1a3 Imps in the network may automatically trace all messages sent
      on link 0.

   1b Primary Links

      1b1 A user at a given HOST may have exactly 1 primary link to each
      of the other HOSTs on the network.

         1b1a The primary link must be the first link established
         between a HOST user and another HOST.

         1b1b Primary links are global to a user, i.e. a user program
         may open a primary link, and that link remains open until it is
         specifically closed.






 
RFC 2


         1b1c The primary link is treated like a teletype connected over
         a normal data-phone or direct line by the remote HOST, i.e. the
         remote HOST considers a primary link to be a normal teletype
         user.

         1b1d The primary link is used for passing (user) control
         information to the remote HOST, e.g. it will be used for
         logging in to the remote host (using the remote hosts standard
         login procedure).

   1c Auxilliary Links

      1c1 A user program may establish any number of auxilliary links
      between itself and a user program in a connected HOST.

         1c1a These links may be used for either binary or character
         transmission.

         1c1b Auxilliary links are local to the sub-system which
         establishes them, and therefore are closed when that subsystem
         is left.

2 MANIPULATION OF LINKS

   2a Control links

      2a1 The control link is established at system load time.

      2a2 The status of a control link may be active or inactive

         2a2a The status of the control link should reflect the
         relationship between the HOSTs.

   2b Primary Links

      2b1 Primary links are established by a user or executive call to
      the monitor