IEN 149                                                        J. Postel
RFC 765                                                              ISI
                                                               June 1980

                         FILE TRANSFER PROTOCOL


INTRODUCTION

   The objectives of FTP are 1) to promote sharing of files (computer
   programs and/or data), 2) to encourage indirect or implicit (via
   programs) use of remote computers, 3) to shield a user from
   variations in file storage systems among Hosts, and 4) to transfer
   data reliably and efficiently.  FTP, though usable directly by a user
   at a terminal, is designed mainly for use by programs.

   The attempt in this specification is to satisfy the diverse needs of
   users of maxi-Hosts, mini-Hosts, and TIPs, with a simple, and easily
   implemented protocol design.

   This paper assumes knowledge of the following protocols described in
   the ARPA Internet Protocol Handbook.

      The Transmission Control Protocol

      The TELNET Protocol

DISCUSSION

   In this section, the terminology and the FTP model are discussed.
   The terms defined in this section are only those that have special
   significance in FTP.  Some of the terminology is very specific to the
   FTP model; some readers may wish to turn to the section on the FTP
   model while reviewing the terminology.

   TERMINOLOGY

      ASCII

         The ASCII character set as defined in the ARPA Internet
         Protocol Handbook.  In FTP, ASCII characters are defined to be
         the lower half of an eight-bit code set (i.e., the most
         significant bit is zero).

      access controls

         Access controls define users' access privileges to the use of a
         system, and to the files in that system.  Access controls are
         necessary to prevent unauthorized or accidental use of files.
         It is the prerogative of a server-FTP process to invoke access
         controls.




                                   1
 

                                                                        
June 1980                                                        IEN 149
File Transfer Protocol                                           RFC 765



      byte size

         There are two byte sizes of interest in FTP:  the logical byte
         size of the file, and the transfer byte size used for the
         transmission of the data.  The transfer byte size is always 8
         bits.  The transfer byte size is not necessarily the byte size
         in which data is to be stored in a system, nor the logical byte
         size for interpretation of the structure of the data.

      data connection

         A simplex connection over which data is transferred, in a
         specified mode and type. The data transferred may be a part of
         a file, an entire file or a number of files.  The path may be
         between a server-DTP and a user-DTP, or between two
         server-DTPs.

      data port

         The passive data transfer process "listens" on the data port
         for a connection from the active transfer process in order to
         open the data connection.

      EOF

         The end-of-file condition that defines the end of a file being
         transferred.

      EOR

         The end-of-record condition that defines the end of a record
         being transferred.