APPENDIX A: GLOSSARY OF ACRONYMS...................................35













 
RFC 2026               Internet Standards Process           October 1996


1.  INTRODUCTION

   This memo documents the process currently used by the Internet
   community for the standardization of protocols and procedures.  The
   Internet Standards process is an activity of the Internet Society
   that is organized and managed on behalf of the Internet community by
   the Internet Architecture Board (IAB) and the Internet Engineering
   Steering Group (IESG).

1.1  Internet Standards

   The Internet, a loosely-organized international collaboration of
   autonomous, interconnected networks, supports host-to-host
   communication through voluntary adherence to open protocols and
   procedures defined by Internet Standards.  There are also many
   isolated interconnected networks, which are not connected to the
   global Internet but use the Internet Standards.

   The Internet Standards Process described in this document is
   concerned with all protocols, procedures, and conventions that are
   used in or by the Internet, whether or not they are part of the
   TCP/IP protocol suite.  In the case of protocols developed and/or
   standardized by non-Internet organizations, however, the Internet
   Standards Process normally applies to the application of the protocol
   or procedure in the Internet context, not to the specification of the
   protocol itself.

   In general, an Internet Standard is a specification that is stable
   and well-understood, is technically competent, has multiple,
   independent, and interoperable implementations with substantial
   operational experience, enjoys significant public support, and is
   recognizably useful in some or all parts of the Internet.

1.2  The Internet Standards Process

   In outline, the process of creating an Internet Standard is
   straightforward:  a specification undergoes a period of development
   and several iterations of review by the Internet community and
   revision based upon experience, is adopted as a Standard by the
   appropriate body (see below), and is published.  In practice, the
   process is more complicated, due to (1) the difficulty of creating
   specifications of high technical quality;  (2) the need to consider
   the interests of all of the affected parties;  (3) the importance of
   establishing widespread community consensus;  and (4) the difficulty
   of evaluating the utility of a particular specification for the
   Internet community.






 
RFC 2026               Internet Standards Process           October 1996


   The goals of the Internet Standards Process are:
   o  technical excellence;
   o  prior implementation and testing;
   o  clear, concise, and easily understood documentation;
   o  openness and fairness;  and
   o  timeliness.

   The procedures described in this document are designed to be fair,
   open, and objective;  to reflect existing (proven) practice;  and to
   be flexible.

   o  These procedures are intended to provide a fair, open, and
      objective basis for developing, evaluating, and adopting Internet
      Standards.  They provide ample opportunity for participation and
      comment by all interested parties.  At each stage of the
      standardization process, a specification is repeatedly discussed
      and its merits debated in open meetings and/or public electronic
      mailing lists, and it is made available for review via world-wide
      on-line directories.

   o  These procedures are explicitly aimed at recognizing and adopting
      generally-accepted practices.  Thus, a candidate specification
      must be implemented and tested for correct operation and
      interoperability by multiple independent parties and utilized in
      increasingly demanding environments, before it can be adopted as
      an Internet Standard.