5.2.1 RFC822 Subtype ....................................   28
   5.2.2 Partial Subtype ...................................   29
   5.2.2.1 Message Fragmentation and Reassembly ............   30
   5.2.2.2 Fragmentation and Reassembly Example ............   31
   5.2.3 External-Body Subtype .............................   33
   5.2.4 Other Message Subtypes ............................   40
   6. Experimental Media Type Values .......................   40
   7. Summary ..............................................   41
   8. Security Considerations ..............................   41
   9. Authors' Addresses ...................................   42




 
RFC 2046                      Media Types                  November 1996


   A. Collected Grammar ....................................   43

1.  Introduction

   The first document in this set, RFC 2045, defines a number of header
   fields, including Content-Type. The Content-Type field is used to
   specify the nature of the data in the body of a MIME entity, by
   giving media type and subtype identifiers, and by providing auxiliary
   information that may be required for certain media types.  After the
   type and subtype names, the remainder of the header field is simply a
   set of parameters, specified in an attribute/value notation.  The
   ordering of parameters is not significant.

   In general, the top-level media type is used to declare the general
   type of data, while the subtype specifies a specific format for that
   type of data.  Thus, a media type of "image/xyz" is enough to tell a
   user agent that the data is an image, even if the user agent has no
   knowledge of the specific image format "xyz".  Such information can
   be used, for example, to decide whether or not to show a user the raw
   data from an unrecognized subtype -- such an action might be
   reasonable for unrecognized subtypes of "text", but not for
   unrecognized subtypes of "image" or "audio".  For this reason,
   registered subtypes of "text", "image", "audio", and "video" should
   not contain embedded information that is really of a different type.
   Such compound formats should be represented using the "multipart" or
   "application" types.

   Parameters are modifiers of the media subtype, and as such do not
   fundamentally affect the nature of the content.  The set of
   meaningful parameters depends on the media type and subtype.  Most
   parameters are associated with a single specific subtype.  However, a
   given top-level media type may define parameters which are applicable
   to any subtype of that type.  Parameters may be required by their
   defining media type or subtype or they may be optional.  MIME
   implementations must also ignore any parameters whose names they do
   not recognize.

   MIME's Content-Type header field and media type mechanism has been
   carefully designed to be extensible, and it is expected that the set
   of media type/subtype pairs and their associated parameters will grow
   significantly over time.  Several other MIME facilities, such as
   transfer encodings and "message/external-body" access types, are
   likely to have new values defined over time.  In order to ensure that
   the set of such values is developed in an orderly, well-specified,
   and public manner, MIME sets up a registration process which uses the
   Internet Assigned Numbers Authority (IANA) as a central registry for
   MIME's various areas of extensibility.  The registration process for
   these areas is described in a companion document, RFC 2048.




 
RFC 2046                      Media Types                  November 1996


   The initial seven standard top-level media type are defined and
   described in the remainder of this document.

2.  Definition of a Top-Level Media Type

   The definition of a top-level media type consists of:

    (1)   a name and a description of the type, including
          criteria for whether a particular type would qualify
          under that type,

    (2)   the names and definitions of parameters, if any, which
          are defined for all subtypes of that type (including
          whether such parameters are required or optional),

    (3)   how a user agent and/or gateway should handle unknown
          subtypes of this type,

    (4)   general considerations on gatewaying entities of this
          top-level type, if any, and

    (5)   any restrictions on content-transfer-encodings for
          entities of this top-level type.

3.  Overview Of The Initial Top-Level Media Types